Filters

Type

Brand

Batteries, BMS and Chargers

36 V 7.8 A/H Battery with XT30 and JST [eWheel] connectors

15456
Battery for Xiaomi M365 as it has a built-in communication port, with brand new EVE cells, All batteries are checked before shipping, Battery features: -Capacity: 7.8Ah -Voltage: 36v -Cell: 18650 EVE 2500mA/h -Configuration: 10S3P -Discharge connector: XT 30 male -Charge connector: JST male 2 pin connector BMS features: -Maximum charge: 42v (4.2v per cell) -Balance start: 4v -Cut-off voltage: 30v (3v per cell) -Maximum discharge (current peaks): 20A -Recommended discharge (Continuous discharge) 10A -BMS with common charging port -Maximum charge: 4A 6-month warranty, conditions below,
EWHEEL
View

Battery 36 V 7.8 A/H M365/1S/ESSENTIAL/MI3 [eWheel] for XIAOMI

36263
It can be installed in original Xiaomi scooters or similar by leaving the communication port and the rear light connector disconnected, Battery features-Theoretical capacity: 7.8Ah-Actual performance at 9A discharges: 7.2~7.6 A/h-Voltage: 36v-Cells: EVE ICR18650-26V 2550mAh-Configuration: 10S3P-Discharge connector: XT 30 male-Charge connector: JST male 2-pin connector, BMS features:-Maximum charge: 42v (4.2v per cell)-Balance start: 4v-Cut-off voltage: 30v (3v per cell)-Maximum discharge (current peaks): 20A-Recommended continuous discharge: 15A-BMS with separate charging port-Maximum charge: 2A 6-month warranty, conditions below,
EWHEEL
View

36 V 9.6 A/H Battery for XIAOMI M365/1S/ESSENTIAL/MI3 [eWheel]

BB-008
Battery designed for eWheel with new EVE 18650 cells of good original quality, all batteries are checked before being sent. It can be installed in Xiaomi copy scooters or similar by leaving the communication port and the rear light connector disconnected. Battery features -Capacity: 9.6Ah-Voltage: 36v-Cells: EVE ICR18650-33V 3100 mAh-Configuration:10S3P-Discharge connector: XT 30 Female-Charge connector: 2-pin male JST connector, BMS features: -Maximum charge: 42v (4.2v per cell) -Balance start: 4v -Cut-off voltage: 30v (3v per cell) -Maximum discharge (current peaks): 25A -Recommended discharge (continuous discharge) 20A -BMS with separate charging port -Software version: 115 6-month warranty, conditions below,
EWHEEL
View

48 V 15.6 A/H Batumulator for Smartgyro Speedway [eWheel]

BB-015
Manufactured with brand new EVE cells, superior quality to the original battery of those scooters, Battery features:-Actual capacity: 15.6A/h (Test conducted at 20A with cutoff at 39v)-Nominal voltage: 48V-Maximum voltage: 54.6-Cell composition: 10S6P-Cell model: Li-ON icr18650 2550mA/h [EVE]-Maximum recommended discharge: 40 A-Continuous discharge: 25 A-Maximum recommended charge: 3 A-Charging port: 2 x Dean type T Female-Discharge port: XT60 Male-Includes moisture label: YesBMS features:-Charge: 1-5 A-Discharge: 40 A-Cell cutoff voltage: 2.8 V-Type: Separate charging port without communication6 months warranty, conditions below,
EWHEEL
View

48 V 19.2 A/H battery for SmartGyro Speedway [eWheel]

BB-016
Manufactured with brand new EVE cells, superior quality to the original battery of those scooters, Battery features:-Actual capacity: 19.2A/h (Test conducted at 20A with cutoff at 39v)-Nominal voltage: 48V-Maximum voltage: 54.6-Cell composition: 10S6P-Cell model: Li-ON icr18650 3100mA/h [EVE]-Maximum recommended discharge: 40 A-Continuous discharge: 25 A-Maximum recommended charge: 3 A-Charging port: 2 x Dean type T Female-Discharge port: 2 x XT60 Male-Includes moisture label: YesBMS features:-Charge: 1-5 A-Discharge: 40 A-Cell cutoff voltage: 2.8 V-Type: Separate charging port without communication6 months warranty, conditions below,
EWHEEL
View

External battery 36 V 12.8 A/H [eWheel]

BB-010
Battery designed for eWheel with new high-quality EVE 18650 cells, all batteries are checked before being shipped, Custom made to be installed in the Column of Xiaomi, Cecotec, or brands with similar characteristics in a 2 or 3L bag, It can be connected in parallel or switched, Battery characteristics, -Capacity: 12.8Ah-Voltage: 36v-Cells: EVE ICR18650-33V 3100 mAh-Configuration: 10S4P-Discharge connector: XT 60 Male-Charge connector: DC 8mm female (xiaomi type) BMS characteristics: -Maximum charge: 42v (4.2v per cell) -Balance start: 4v -Cut-off voltage: 30v (3v per cell) -Maximum discharge (current peaks): 30A -Recommended discharge (Continuous discharge) 20A -BMS with separate charging port -Maximum charge: 4A 6 months warranty, conditions below,
EWHEEL
View

External battery 36 V 6.4 A/H [eWheel]

BB-007
Battery designed for eWheel with new high-quality EVE 18650 cells, all batteries are checked before being shipped, Custom made to be installed in the Column of Xiaomi, Cecotec or brands with similar characteristics in a 1, 2, or 3l bag, It can be connected in parallel, Switched connection is not recommended due to its reduced power, Battery features, -Capacity: 6.4Ah-Voltage: 36v-Cells: EVE ICR18650-33V 3100 mAh-Configuration:10S2P-Discharge and charge connector: XT 60 Male BMS features: -Maximum charge: 42v (4.2v per cell) -Balance start: 4v -Cut-off voltage: 30v (3v per cell) -Maximum discharge (current peaks): 15A -Recommended discharge (Continuous discharge): 10A -BMS with common charging port, 6 months warranty, conditions below,
EWHEEL
View

BMS 10S 36V 20A for XIAOMI M365, 1S, Mi3

17635
The new version is manually modified in the factory, therefore it may carry traces of glue such as on the sensor, since each one is tested manually to ensure the quality of the product, As well as other imperfections in soldering, Although it may seem repaired, it is not, It is a brand new product, Common problem solutions: 1- The BMS does not turn on, Check that the balancing flex and all cells are above 3v, 2-Does not charge/the light does not turn blue, Check all temperature sensors shown in the product description images, 3, Fixed blue light, The BMS is detecting an excessive imbalance in the cells or they are too charged, Installation: This BMS is a fully compatible and improved version of the original, therefore it must be completely changed, since the electronics that come in the strip, are designed to take measurements of the battery in a different way than the original, It does not have fuses, but these have been replaced by a discharge control system which, if it detects a short circuit or an excessive temperature at the output, disconnects automatically,
EWHEEL
View

Loading cable switched on XIAOMI

53142-1
This dual battery system is designed to use an external battery independently of the internal one, The switched operation means that while we use one battery the other is disconnected, so we have an independent battery circuit, We use one and when it runs out we switch to the other, This system is done through the switching connector, It is the most reliable system since it does not modify or mix electronics, It would be like removing one battery and putting another, but in this case without dismantling the internal one,
EWHEEL
  • Out-of-Stock
View

Serial connection cable for XIAOMI

53142
This cable is used to add voltages to the controller of any electric scooter, this is achieved with a series battery configuration, which consists of adding to the original battery, the voltage of the second battery we want to install through our cable, Important!! Check that the controller is prepared to support the sum of the voltages, This cable also serves to put a battery current cut-off switch, adding a bridge connector (not included),
EWHEEL
  • Out-of-Stock
View

Cable with a parallel connection for XIAOMI

57688
Connect two batteries at the same time to add capacity and consequently autonomy. To do this, you must be careful that each battery connected in parallel must have similar characteristics and both must be at the same voltage, without exceeding a 0.2V difference between them. Important!! To install batteries in parallel in Xiaomi, you must deactivate the charge mode in the firmware reprogramming,
EWHEEL
View
OK Cancel
Product added to cart